Twister PLUS 5mm Tile Levelling Screw – Pack of 200

The Twister PLUS Levelling Screw is the threaded stud component of the Twister PLUS 2-part tile levelling system. Designed for professional and DIY tile installations, it works in combination with the Twister PLUS Re-usable Nut to hold tiles perfectly flat and level during adhesive curing — eliminating lippage and ensuring a flawless finish.

Key Features

• Sets a precise 5mm joint gap between tiles
• Compatible with tiles and porcelain paving 6mm to 22mm thick
• Simple screw-in action — no specialist tools required
• Works with the Twister PLUS Re-usable Nut (sold separately or as a combo)
• Suitable for floor tiles and exterior porcelain paving
• Disposable after use — stays beneath the grout line
• Pack of 200 screws

How It Works

Place the Twister PLUS base screw into the adhesive at the tile joint. Slide the tile over the screw stem, then twist on the re-usable nut to apply even downward pressure across adjacent tiles. Once the adhesive has cured, snap off the stem at the break point by tapping sideways. The base remains buried beneath the grout — clean, hidden, and permanent.

Suitable For

• Porcelain floor tiles (indoor and outdoor)
• Large format tiles
• Exterior porcelain paving slabs
• Any tile 6–22mm in thickness

For best results, pair with the Twister PLUS Re-usable Nut (100-pack). Save with the Twister PLUS Levelling System Combo Pack — includes 200 screws and 100 nuts.